Filament for 3d printer do it yourself

Advanced development and application of modern technologies has allowed manufacturers to create a printer that provides a volume printout of various elements. This technology has appeared relatively recently, but it could find application in many areas of human activity: in large enterprises, in science, medicine ...

The principle of operation is similar to the operation of conventional models of printers. After connecting to a computer and installing software, all the systems are set up, then a part is created using ready-made layouts for the figures, which is then sent to the printout. One of the few and most important differences is the performance of work not on a plane, but in volume.

To ensure the normal functioning of the equipment, it is necessary to use special materials to create volumetric figures in space. In modern devices uses a special polymer material, which we will discuss in our article.

To create any part, material is required for manufacturing. Using the interaction of complex processes, the polymer is fed into the channel, heated, and then applied in layers on the working surface of the thermal table of the printer.

The filament in translation from English means a thread or threadlike strip. This most accurately reflects the main type of material at the nozzle exit. As a special polymer, various types of plastic can be used, having their own advantages and disadvantages. For work, one should carefully select the material to be used in accordance with the requirements for the parts to be obtained when printing.

However, the use of original elements has several disadvantages:

  • Difficulty in ordering and delivering components for work.
  • The high cost of purchased materials.
  • Difficulty in selecting for a particular task to be performed.

Important! These drawbacks make it difficult to work on a 3D printer and make it very expensive, so many users are looking for ways to create filaments on their own.

However, it should be understood that the use of non-native elements can lead to malfunctions and failures in the system that provides the workflow.

Fortunately, for most owners of 3D printers, there are special tools for creating filaments at home. These devices are called extruders. Currently, this equipment can be found on special sites on the Internet. Manufacturers offer a choice of three possible configuration options. Depending on the cost, the set of possibilities will differ.

Work on creating material in the home consists of several stages. If you decide to purchase this device, use the instructions for use:

  1. Turn on the purchased equipment, make the necessary settings for quality work.
  2. Buy raw materials to create threads.
  3. Load the raw material in the desired compartment. If desired, you can mix several types of plastic to obtain different properties.
  4. Adjust the feed rate and heating temperature.
  5. Wait for the plastic to pass through the device to form a complete coil.

Watch the video: Recycle your failed 3D prints! Make new filament at home. (March 2024).

Leave Your Comment