Modern technologies allow us to communicate, despite the distance, there are more and more services for exchanging audio or video calls over the Internet. But for all this, you definitely need a microphone, otherwise the interlocutor simply will not hear you. Many people have to deal with the fact that the microphone is not configured correctly: extra noise, excessive sensitivity and other troubles appear. What to do in this situation? Can I fix the problems myself? You will learn about all this in this article.
Microphone setup
In most cases, there are problems with the sensitivity of the device. This is because users do not know how to properly adjust the volume and response of the accessory, which leads to discomfort in operation.
IMPORTANT. Please note that there are many factors that also influence the level of sensitivity. This is, first of all, the model of the device, the programs that are used in conjunction with it, the characteristics of the room and much more. All this should be considered when setting up the microphone to get the perfect sound quality.
You have to constantly strain your voice, bring the device as close to your mouth as possible and go to other similar tricks. How to get rid of this problem?
You can do it yourself. This setup is very quick and easy, without requiring special technical skills. You just need to go to the “Control Panel” and find the microphone in the list under the heading “Recording Devices”. Then open its properties and configure. Change the volume level, and also cancel the "exclusive mode". The fact is that connecting this mode can lead to a sharp decrease in the sensitivity of the device during operation. This is due to the fact that its volume is regulated by third-party programs, for example, Skype.
How to lower the microphone sensitivity
In the opposite situation, there is also little pleasant: excessive sensitivity of the device can be uncomfortable. Very often this is due to the technical characteristics of the device itself, but you can try several ways that can help make using a microphone more comfortable.
The easiest way is to cover the device with a not very thick cloth, which will significantly reduce its sensitivity. You can also try connecting a microphone using a unit with an additional variable resistor. The resistance of the device is much less than the resistance of the unit, so the sensitivity will decrease.
If none of the above helps, then go to the settings on the computer. "Sound settings" will allow you to make the sound exactly the way you want.
What to do if you can hear sound from the headphones in the microphone
Sometimes the interlocutor begins to hear the sound from your headphones, which is also very inconvenient and interferes with communication. This is very relevant for those who play games on the computer, where there is the possibility of voice communication between participants.
In this case, the exact cause of what is happening has not yet been found. First of all, turn off the “mixer” option in the sound settings. If the problem persists, then it may be worth amplifying the microphone. It should also be disabled.
Perhaps, due to excessive sensitivity or too loud sound in the headphones, the microphone captures it and transfers it to the interlocutor. The easiest solution is to refuse to use the built-in microphone and purchase a separate one. This way you can easily get rid of the transmission of unnecessary sounds.
IMPORTANT. When choosing a microphone, pay attention not only to its essential characteristics, but also to compatibility with your computer. Consult the seller who will help you choose the best option. Choosing the cheapest model can turn into a quick disappointment in the product - in most cases, such devices are of very poor quality.
How to remove the sound of the keyboard in the microphone
The extra sounds can be not only music from the headphones, but also loud clicks of the keyboard, despite the fact that the microphone seems to be at a considerable distance from it.
First of all, you need to try to turn down the volume of the device in the settings, as described previously. If this does not help, then it makes sense to connect noise reduction. You can connect a similar function yourself and configure it so that only keyboard clicks are isolated.
If you don’t feel like messing with other programs, then you can use the simplest way, also already mentioned earlier - to cover the microphone with a rag or foam rubber. In this case, the volume will decrease and no additional settings will be required. In addition, you should still place the device away from the keyboard and try a little less hard knock on the keys. This will help to achieve maximum results and make communication comfortable.
Special microphones with built-in noise reduction are on sale, but they usually cost significantly more than usual ones. Is it worth it to spend a little more money for the sake of having such a function, it's up to you.
Now you know how you can increase or decrease the sensitivity of the microphone, as well as get rid of excess noise that is sometimes heard by the interlocutor. With this knowledge, you can make communication in Skype or any other program comfortable and calm. Thanks to modern computers, relatives, friends or just acquaintances can always keep in touch, even while being at a considerable distance from each other. That is why it is so important to have headphones and other accessories that connect to the unit. An important point will be the fact in which particular connectors each plug should be stuck. Remember that the green jack is always for headphones, and the red is for microphone. Knowing this rule, you will never mix up the plugs and correctly connect the accessories to the computer.
Leave Your Comment