How to connect ps3 to the monitor

Despite the fact that a new generation of Play Statoin has already been formed, most still use the third series. Therefore, you need to figure out where such a significant demand comes from. The game console allows not only to play various kinds of games, but also to watch movies, listen to any music and even send letters by e-mail.

Actually, the release of such an aggregate was stopped as far back as the year before last, in 2017. In the same article, we will consider connection options, as well as analyze tips that can come in handy during the execution of actions.

How to connect using cable

As you know, cables come in many forms. The process itself should begin by fixing the HDMI to the monitor.

ATTENTION! In addition to the named product, DVI can also be used, however, a special adapter will be needed.

If the manipulation fails, then trying to bring it to the end is strongly discouraged. Further, everything is much simpler: you just have to output the sound in the event that no speakers are available. This is done on the basis of two methods, at your discretion:

• With the help of "tulips." To do this, connect the cable to the console as follows: both red and white are connected to the input. It is most often located on the back of the device. Then you need to go into the settings and perform a certain operation. It should be noted "sound settings." The “audio output settings” window will be available for you, where you should choose the option that is at the very bottom. Therefore, to complete the steps it is necessary to fix the data due to the “X” mark.
• Optical cable. It consists in the fact that one of the ends is based in the console, and the other in the columns. Then you also need to go to the menu to configure the information. The actions are the same as described at the beginning of the paragraph.

Which cables can I use?

As you know, there are several varieties of the product. Thus, we consider each connection option corresponding to the model.

1. The easiest and perhaps the most common way is using hdmi. It will most likely not be bundled with a game console. Therefore, you need to purchase it yourself. To achieve the result, one end should be fixed in the product, and the other - in any free connector. Then you can safely launch the console and find the channel that is directly connected to the unit.
2. Using AV. Like the previous method, this one is not particularly difficult. You must match all the items with the appropriate color.
3. "Tulips." Also in great demand, since accessibility is at an altitude. Especially saves when the device is made according to the old model. The whole process consists in similarly connecting one side of the cable to the product, and all cables are matched by the shades of the connector.
4. Do not forget about such an exit as SCART. Everything is the same as above in the steps described.

ATTENTION! A special adapter will be required. And also do not miss the fact that the button must be held down until the second signal beeps directly on ps3 itself.

Can I connect via a network without a cable?

Yes, the answer to the question is really positive. However, this method requires a little special knowledge. Therefore, you are provided with a plan with actions in a certain sequence:

1. First of all, you need to open the folder on the PC under the name "network connections".
2. There, select the adapter and disconnect it. Then you can go to the "properties" section.
3. In the list provided, you can find “Internet Protocol 4” and click on it, then ip will be available.
4. You will need to specify the subnet address, save it and reactivate the adapter.
5. The equipment itself is connected using a PatchCord cable, and the play station is turned on.
6. In the process of product activation, you need to turn to its settings, where the speed is converted to an automatic mode.
7. At the end of the process, you should record the ip address yourself, after which it will be the main one on your computer.

Connection Recommendations

As you can see, if you are the owner of a device with a cable, then performing the described manipulations will not be a single task, since they are available to every person, even the most inexperienced user. In addition, it is important to have certain adapters available if you need it.

Directly when configuring the functionality due to the network, of course, the complexity increases. However, subject to all these points, you can also achieve an impressive result. In addition, do not forget about the sound output to the speakers, if any. This is best done in the process of setting up all the parameters so that everything is ready right away at the output.