Happy owners of glass-ceramic plates are usually very satisfied, because the device saves energy. As well as how precisely and quickly the temperature of the burners is controlled.
However, this type of kitchen equipment has one vulnerability - the hob. It is a layer of special heat-resistant glass, which under certain conditions can crack.
Cracks on the hob are one of the most common breakdowns on ceramic glass plates.
Causes of defects
The main cause of damage is the fall of heavy objects on the hob. This is usually a pan or pan dropped out of the hands.
However, it happens differently: the induction panel for a long time steadily endures all the vicissitudes of fate. And then it suddenly cracks for no apparent reason. This is due to the fact that destructive loads in the past led to the appearance of microdamages in the material that are not visible to the eye. And at some point the inevitable happened, after which the glass-ceramic hob could not stand it.
Important! An additional source of risk for hobs is the use of improper detergents when cleaning them.
It happens when using abrasive materials that scratch the surface. Despite the fact that damage to the eye may be invisible, but in the end they will make themselves felt.
If the glass panel is cracked, it must be replaced. Let's see how glass is replaced on the hob.
Hob replacement
People faced with such a need often have a number of questions. We have prepared answers to them.
Where to go to replace the hob
Did you find that the glass has broken or cracks have appeared on its surface? And do not know what to do? To change the panel, you should consult a specialist!
There are special service centers for the repair of household appliances.
These may be representative offices of the companies that manufactured your stove. Large brands, such as Hotpoint, Bosh, Maunfeld, necessarily have branches in all major cities.
You can also contact the universal centers for the repair of household appliances. They work with a wide range of product breakdowns from different companies.
Important! Before turning to the help of a service, make sure that it has direct access to the manufacturer of your electric stove.
After all To replace the hob, use a proprietary glass-ceramic panel. These are not sold in the public domain, therefore, they can only be purchased from the manufacturer.
How is glass replaced?
The installation of a new hob instead of the one that cracked occurs according to the following algorithm.
Request
You can usually leave a request at a service center remotely. For example, by phone, with the operator. He will tell you exactly when to wait for the master.
Diagnostics
Before starting work, damage assessment is always carried out.. Even if everything seems obvious to you, some hidden pitfalls may appear. It is better to trust a specialist in this matter.
Coordination of upcoming work
After diagnosis the master tells the customer exactly what needs to be replaced. It also clarifies what procedures to be done, how much it will cost.
The next stage will begin only after you know all the details and agree with the plan for the upcoming repair.
Repairs
If it really is only about replacing the glass, which is cracked, then the process will take several hours. From the outside, it looks pretty simple. However, it requires the use of special equipment, branded parts and good skills.
Job Acceptance
The final part of this whole process is checking how the surface works.
Important! Keep in mind that service centers usually give a guarantee for their work for a period of 1-2 years, depending on the particular company.
Surface replacement cost
The figure consists of several main components: the price of necessary spare parts, the cost of work. There may also be an additional premium for urgent repairs. But service centers usually carry out diagnostics for free.
Firstly, the price of spare parts is taken into account. It depends on the specific company.producing kitchen appliances. AND It is equal to about 10,000 to 19,000 rubles. Secondly, the complexity of the work performed is estimated. Direct the cost of repair work is usually in the range of 2.5-4 thousand rubles.
In this way, the cost of replacing the hob is approximately 50-60% of the price of a new stove.
Can I replace the panel myself
This question usually arises in people right after they get acquainted with the cost of work. She is really great. However, this is exactly the case when the avaricious pays twice. Trying to save money and install a new glass surface on a stove yourself can be very expensive for several reasons.
Difficulties with finding and buying a new glass surface
These are not for sale in free access.. It’s difficult to find an analogue - ordinary tempered glass will not work here. After all, it is not intended for specific point thermal loads that characterize the operation of a glass-ceramic plate. Therefore, it can suddenly burst or even scatter into many small fragments. It is imperative to use a branded hob.
Old panels are sometimes sold in the form of spare parts from devices of a similar type that have become unusable. Their use for repair is less dangerous.
but there is no guarantee that the used panel installed today will not become unusable tomorrow. After all, she probably during the operation was subjected to a variety of loads. Most likely, cracks on such a surface will appear very quickly. So, again you will face the need to replace it.
Replacement work requires special skills and equipment
This process takes relatively little time and therefore from the outside seems simple. But this is not so; it requires considerable qualifications. Inexperience can break the plate. Or incorrectly assess the essence and causes of the breakdown.
Important! If cracks or other defects appear on the hob, you should contact a good service center.
Only professional masters will guarantee you a successful result as soon as possible.
Leave Your Comment